Description - Get our most popular rubber floor for Olympic lifting in pre-cut sizes with our 1/2” Pre-Cut Mega Rubber Rolls. These rubber rolls are great for any commercial gym or CrossFit gym, and they’re ready to ship quickly. A 5-year warranty backs these rubber floor rolls.
Material – Recycled rubber buffings and colored EPDM virgin rubber flecks. Rubber buffings are the “Filet Mignon” of the recycled rubber industry because they are the cleanest, strongest, and most consistent recycled rubber material available as compared to some of the low-cost recycled crumb rubber alternatives available.
Size – 4' x 10', 4' x 15', 4' x 25', 4' x 50'.
Thickness – 1/2"
Weight – Our 4' x 10' rolls weigh 120 Lbs, our 4' x 15' rolls weigh 180 Lbs, our 4' x 25' rolls weigh 300 Lbs, and our 4' x 50' rolls weigh 600 Lbs.
Recommended Uses – Our 1/2" Pre-Cut Mega Rubber Rolls are the perfect flooring option for anywhere heavy weights are dropped. These rolls have been used in commercial gyms, CrossFit gyms,
in garage gyms, as non-slip flooring for walkways, and much more.
Available For Order - Ships between Oct 4 - 11
1/2" Pre-Cut Mega Rubber Rolls are easy to clean. Maintenance for these rubber rolls typically includes:
- Vacuuming any loose crumbs, dirt, dust, or debris from the rubber floor covering when necessary.
- Occasional damp mopping of the flooring rolls with a mild soap and water solution. A few recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions,
Click Here.
When installing rolled rubber flooring, it is recommended that you use an adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common methods of adhering rubber rolls to the subfloor are:
A: Double-Sided Tape Installation
- First, clean your subfloor so that it is free of all dust, dirt, and debris.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
- Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
- Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rolls at one end of the room. Apply double-sided tape to the floor along the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
B: Glue Installation
- First, clean your subfloor so that it is free of all dirt, dust, and debris. Also, when gluing your flooring down, it is recommended that the subfloor is free of any moisture.
- Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for 24-48 hours to ensure the proper installation of your new flooring.
- Note: Rolls may be directional, so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure the color matches.
- Make any necessary cuts to the rolls to fit them into the room using a straight edge and a utility knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
- Roll up the rolls at one end of the room. Spread a light layer of polyurethane adhesive that is 10’ long (maximum) and unroll the flooring into the adhesive 10’ at a time.
- Repeat this step for every 10’ of roll length until the entire roll has been unrolled into its desired position.
- After all of the rolls have been glued down, it is often recommended to use a 100-pound roller on the floor to guarantee good adherence to the subfloor. If a roller is not available, walking on the flooring in small choppy steps may also work.
For printable installation instructions, please
Click Here.
