Description - New and improved, our interlocking Impact Rubber Tiles are still the ideal non-slip rubber floor for any home gym. Constructed using an innovative production process, these foam rubber tiles combine the best of both worlds. The rubber top is very durable and slip-resistant while the foam base is soundproof, water-resistant, and insulating. This combination of benefits makes these interlocking tiles the perfect floor for high-impact exercises like plyometrics and jump training. Featuring a more consistent rubber top, a more shock-absorbent foam base, and a light overall tile weight, make these the perfect flooring option for any room in your home or business.
Material – Recycled rubber top layer bonded to a closed cell EVA foam rubber base.
Size – 2' x 2'
Thickness – Approximately 3/8" (9mm) and 3/4" (18mm).
Weight – Our 3/8" tile weighs 3 Lbs. Our 3/4" tile weighs approximately 4 Lbs.
Recommended Uses – High impact foam rubber tiles have been used successfully as interlocking home gym mats, as inexpensive trade show flooring, in schools, churches, and daycare centers for kid’s playmats, and in a variety of other locations where a foam matting with a rubber top surface would be useful to provide cushioning and traction underfoot.
In Stock - Ships between Mar 6 - 7
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.