Description - Are you tired of slipping and sliding around your home gym like a clumsy seal? Fear not, our 5mm Rubber Rolls are here to save the day (and your dignity)! Not only do these bad boys come in all purpose Black that will make your home gym look like a million bucks, but they also provide the perfect amount of grip to keep you from embarrassing yourself during your workouts. So, whether you're doing burpees or twerking (we won't judge), our rubber rolls will keep you steady on your feet. And with a 5-year warranty, you can rest assured that our rolls will be there for you through thick and thin (and squats, lunges, and everything in between). So why settle for a slippery gym floor when you can have the non-slippery, non-seal-like, non-embarrassing solution? Get your 5mm Rubber Rolls today!
Material - Recycled rubber and EPDM colored rubber flecks.
Width - Each roll is 4' wide.
Length – The rolls are custom cut to your desired lengths free of charge, provided that each roll length is at least 15’ or longer and in whole foot increments such as 15’, 16’, 17’, etc. You will normally receive an extra few inches on each roll. This allows for a quick and easy installation.
Thickness - 5mm (Approx. 3/16")
Weight - .35 Lbs. per sqft.
Recommended Uses - Our 5mm Rubber Rolls have proven to be incredibly versatile and can be used in a wide variety of settings. From creating the perfect workout space in your home gym or personal training studio to providing a safe and slip-resistant surface in school locker rooms and basements, our rubber rolls have got you covered. They're also ideal for art studios or any other space where a sturdy and non-slip flooring solution is required. No matter the application, our 5mm Rubber Rolls will provide the perfect anti-slip flooring solution you need.
5mm Rubber Rolls are easy to clean and maintain. To keep them in tip-top shape, we recommend:
- Vacuuming loose crumbs, dust, or debris as needed.
- Occasionally damp mopping with a mild soap and water solution. We suggest using Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil-based cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, or paint thinner as they can break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning guidelines, please Click Here.
Use an adhesive when installing rolled rubber flooring to prevent the rolls from moving around or sliding apart. The most common methods of adhering rubber rolls to the subfloor are:
A: Double-Sided Tape Installation
- Clean the subfloor to remove dust, dirt, and debris.
- Loose lay the rolls in the room and let them relax for 24-48 hours.
- Note: Ensure roll colors match and make necessary cuts to fit the room. Leave a gap roughly the thickness of the rolls for expansion and contraction.
- Roll up the rolls at one end of the room and apply double-sided tape to the floor along the perimeter of each roll.
- Place the rubber rolls back into position on top of the double-sided tape.
B: Glue Installation
- Clean the subfloor and ensure it is free of any moisture.
- Loose lay the rolls in the room and let them relax for 24-48 hours.
- Note: Ensure roll colors match and make necessary cuts to fit the room. Leave a gap roughly the thickness of the rolls for expansion and contraction.
- Roll up the rolls at one end of the room and spread a light layer of polyurethane adhesive that is 10’ long (maximum) and unroll the flooring into the adhesive 10’ at a time.
- Repeat this step for every 10’ of roll length until the entire roll has been unrolled into its desired position.
- After all rolls have been glued down, use a 100-pound roller on the floor to ensure good adherence to the subfloor. Walking on the flooring in small choppy steps may also work if a roller is not available.
For printable installation instructions, please
Click Here.