Description - If you are in the market for a durable, long-lasting garage floor at an economical price, then our Vented Ecotrax Tiles are the ones for you. Built tough, these interlocking tiles have a rolling weight limit up to 60,000 lbs and can withstand temperatures from -22 – 248 degrees. These garage floor tiles are very easy to install and maintain and are also colorfast ensuring your floor will look great for years to come. This commercially rated garage tile is backed by a 15-year warranty and is made right here in the good ol' USA.
Note: These tiles can be damaged under the weight of a car jack. We recommend using your car jack directly on concrete.
Material – Constructed of high quality impact resistant polypropylene (extremely durable hard thermoplastic polymer). This ensures colorfastness, durability, and chemical resistance.
Size – 15.75” x 15.75”
Thickness – 5/8 Inch
Weight – 1.53 Lbs. per tile
Recommended Uses – Our Vented Ecotrax Tiles are great for both commercial and residential use and have been used as flooring in garages, as workshop flooring, in hangars, as flooring in commerical trucking facilities, as repair shop flooring, as patio flooring, and much more.
Available For Order - Ships between Aug 28 - Sep 4
Interlocking tiles are easy to maintain. Cleaning of these multiuse tiles typically includes:
- Vacuuming or sweeping any loose crumbs, dust, or debris from the tiles when necessary.
- Hose off or damp mop the floor tiles with a mild soap and water mixture for tough or caked on dirt and/or stains.
Garage tiles are easy to install. Installation of these floor tiles typically includes:
- Clean your sub floor so that it is free of all dirt, dust, grease, or other foreign material.
- When installing the hard plastic tiles, we recommend starting in the front left corner of the room and working your way out from there.
- Make sure the female side (loops) of the tile is facing away from the wall.
- After filling the left wall with tiles and the adjacent wall, proceed to fill the rest of the room with whole tiles.
- When you come up to a wall or object, don’t worry. Just measure the area and cut the tiles with a tile cutter or a power saw with a fine-toothed blade and put the trimmed tiles into place.
- When trimming the tiles into place, make sure you leave about a 3/4” space between the tiles and the wall or obstruction.
- Once the tiles are in place, you can then snap in the edge pieces, if you purchased them.