A high quality T-Square!
Simple to use. Provides the right cut
For cutting rubber rolls that are nominally 4 feet wide, this T-square has three deficiencies. First, the rolls are more than 4 feet wide by up to an inch. So, you have to cut the last inch freehand. Second, the 1/4″ thickness of the aluminum structure of the T-square limits the depth into a rubber roll to which a box cutter blade can reach. So, you may need to remove the T-square and finish the cut freehand. Third, if the rubber roll is less than 1/4″ thick, the cross bar of the T-square will prevent the shaft of the T-square from lying flat on the rubber near the cross bar. This air gap increases the likelihood of the blade wandering in that region. Forewarned, though, the product is very useful.
This made the task of cutting 3/8” tiles precise and professional. Never could have achieved this result without it!
If you have uneven floors or walls this item makes the world of a difference to have clean cut lines!
I have placed a couple of orders in the past and on my most recent purchase I noticed you had this t-square so I got it. I can't believe I have never had one of these before. I will have to say this made my most recent project so quick it was ridiculous. I tried using my make shift strait edges to cut the 4' width of my rolls in the past with some pretty decent results but this t-square was awesome! If you don't have one of these and you are buying rubber flooring I highly recommend picking one of these up when you place your order.
I installed several 8mm rubber rolls in my office that I turned into a home gym. I didn't have anything to use as a straight edge like the instructions recommended so ordered this T-square. This was very useful during installation because it allowed me to make precise cuts and made the job much easier. Definitely worth the price. Thanks, David