Complete Your Order
Contact Us
 
9am - 7pm EST Monday - Friday
10am - 7pm EST Saturday

4.7mm Coin Flex Tiles

This product has been discontinued.
Please see comparable products below.
  • Low profile flexible flooring.
  • Easy to clean and install.
  • Resistant to most solvents and chemicals.
  • Odorless and insulating.
  • 25 year manufacturer's warranty for defects.
Description - Our 4.7mm Coin Flex Tiles are a wonderful choice when looking for an American-Made multi-use flooring option. These tiles are durable, flexible, and slip resistant. Designed to be use as garage flooring, these tiles are versatile enough to be use in a variety of other applications, such as basement flooring, trade show flooring, and as utility floors. These garage floor tiles are also resistant to most solvents and chemicals and act as excellent thermal and acoustic insulation.
Specs
Material Flexible PVC
Size 19-5/8” x 19-5/8”
Thickness 3/16" (4.7625mm)
Weight (Approx.) 3 lbs per tile
Colorfast Yes
Chemical Resistant Yes
Slip Resistant Yes
Car Jack Approved Yes
Surface Finish Semi-Gloss
Interlock Style Visible Interlock
Rolling Weight Not Tested
Warranty 25 years
Recommended Uses – Flexible coin tiles are perfect for use as garage flooring, trade show flooring, flooring in stores and boutiques, in utility rooms and even in home gyms.
Note: Flex tile colors are produced in batches, which can lead to color variations in your order. All colors may present some color variation, but Black, Dark Grey, and Light Grey can produce the most. These three colors can vary greatly between batches and thus it is recommended that you order more flooring than is needed for mistakes and replacements. This, in, turn, gives you the greatest chance to keep continuity across your floor. Batching will also affect color variation between samples and your order with Black, Dark Grey and Light Grey showing the most variation.

Available For Order - Ships between Dec 19 - Jan 16

Coin pattern interlocking floor tiles are easy to keep clean due to their impervious floor surface. Cleaning of these garage tiles typically includes:
  • Sweeping and/or vacuuming any loose crumbs, dust, or debris from the tiles when necessary.
  • Periodic damp mopping of the garage floor tiles with a mild soap and water mixture. Some soaps commonly used include Dawn dish detergent and/or Tide laundry detergent.

Note: This is not a stain proof product. Street tar can cause staining to light-colored tiles and in most instances, this staining can be remedied with a cleaner called Purple Power. If you have performance tires, staining can occur with light-colored tiles. In most instances, this may not be remedied with a cleaner. If the staining on your floor does not dissipate, please contact our dedicated Customer Service team at 800-613-0996 who can further assist you.

Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
  • First, clean your sub floor so it is free of all dirt, grease or debris.
  • Snap a chalk line on the sub floor 20” from one wall in your room. Snap another chalk line on the subfloor 20” from an adjacent wall. You should now have a pair of perpendicular lines making an approximate 90-degree angle.
  • Begin laying the interlocking tiles along the chalk lines, snapping the locks together as you go.
  • Leave the perimeter of the room open until the field is installed.
  • After the field is covered, go back and cut in lines along the walls in the room. Leaving a gap at the wall roughly the thickness of tiles being used is recommended to account for expansion and contraction of the floor tiles in varied temperature ranges.

  • Edging Installation Instructions
  • Insert the tile into the groove.
  • Next cut the transition strip to fit the desired area. You can adhere it to the subfloor if desired with a pressure sensitive adhesive.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.

Made in the USA

  • Keeping Production Local
 

Products that are Made in the USA provide jobs for our citizens as well as future generations. Domestically made products ensure that the items we bring into our homes are passed through higher quality control standards and are better not only for our families but for the environment.

Don't see what you're looking for? 
No results found.
prev page 1 ... ... next page
prev page PREV
prev page PREV
NEXT next page
NEXT next page
 
Be the first to add a review Write a Review
All Review Images icon View all customer images
Your item was added to the cart
Color:
Qty:
$0.00 total