Description - Our Octane tiles are the perfect garage floor tile to use in any residential, business or commercial application handling any and all seasonal changes. These tiles have been specially engineered to resist oil, gas, most household chemicals and automobile fluids. Our tiles are extremely stain resistant and formulated to be UV stable allowing them to prevent fading in direct sunlight. Our diamond pattern tiles come engineered with a stronger interlocking system than most comparable garage tiles, with a 6 interlocking loop system. What really sets this product apart from other tiles is its unique diamond pattern which offers superior slip resistance. The octane garage tiles offer superior slip resistance while establishing themselves as one of the strongest tiles on the market today. So if you are looking for a strong and easy to install tile to improve the look of your garage, this is the tile for you.
Note: These tiles can be damaged under the weight of a car jack. We recommend using your car jack directly on concrete.
Material - These tiles are made from a high impact polypropylene.
Size - 12" x 12"
Thickness - 1/2"
Weight - 0.70 Lbs. per tile
Recommended Uses - Octane Diamond series tiles are truly built to be the most versatile garage tile on the market. These tiles are most commonly used in residential garages, but have also been successfully installed at car shows, airplane hangars, in auto dealership showrooms, as trade show flooring, in basements, as retail flooring, in game rooms, as gym flooring, and in workshops.
Octane interlocking modular tiles are easy to maintain. Cleaning of these multipurpose garage floor tiles typically includes:
- Vacuuming or sweeping any loose crumbs, dust, or debris from the interlocking tiles when necessary.
- Hose off or damp mop the floor tiles with a mild soap and water mixture for tough or caked on dirt and/or stains.
Garage tiles are easy to install. Installation of these floor tiles typically includes:
- Clean your sub floor so that it is free of all dirt, dust, grease, or other foreign material.
- When installing the hard plastic tiles, we recommend starting in the front left corner of the room and working your way out from there.
- Make sure the female side (loops) of the tile is facing away from the wall.
- After filling the left wall with tiles and the adjacent wall, proceed to fill the rest of the room with whole tiles.
- When you come up to a wall or object, don’t worry. Just measure the area and cut the tiles with a tile cutter or a power saw with a fine-toothed blade and put the trimmed tiles into place.
- When trimming the tiles into place, make sure you leave about a 3/4” space between the tiles and the wall or obstruction.
- Once the tiles are in place, you can then snap in the edge pieces, if you purchased them.