★★★★★
Highest Rated + Most Reviewed
Over 500,000 customers and 40,000 product reviews

Complete Your Order
Contact Us
 
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday
 

Pre-Cut Regrind Rolls

★★★★★
Price from
SAVE
25%
$1.23 sqft
$246.00 roll
reg: $1.64 sqft
roll: $328.00

Proudly made in the USA
IN STOCK
Ships between Dec 19 - 21
Selected Color: 
roll over image to magnify
ConfettiPre-Cut Regrind Rolls
Confetti Pre-Cut Regrind Rolls Confetti
BlackPre-Cut Regrind Rolls
Black Pre-Cut Regrind Rolls Black

 
4' wide roll
Accessories for Pre-Cut Regrind Rolls
Rubber Floor Ramps
Rubber Floor Ramps
2.5" x 12 linear ft
Transitions a taller floor to a lower floor
Color:
Quantity:
$37.99 $50.65
Weight: 3.50lbs
Duracove Rubber Wall Base
Duracove Rubber Wall Base
2.5" x 3.2mm x 120 ln ft - Coved (with toe)
Covers expansion gap between the floor and the wall
Color:
Quantity:
$198.99 $265.32
Weight: 25.00lbs
Duracove Rubber Wall Base
Duracove Rubber Wall Base
6" x 3.2mm x 100 ln ft - Coved (with toe)
Covers expansion gap between the floor and the wall
Color:
Quantity:
$267.99 $357.32
Weight: 50.00lbs
Accessories banner
  • Details
  • Shipping Info
  • Maintenance
  • Installation Info
Description - Regrind rolled flooring is an extremely low cost yet very durable rolled rubber flooring solution. These rolls offer a functional rubber floor surface however color and density of color flecks between rolls is not guaranteed. These rolls are made from our very own post industrial recycled rubber that is naturally made during the production of our standard recycled rubber products. Regrind rubber rolls are very dense and have an anti slip surface to help keep traction even in the most demanding lateral movement exercises. These rolls work great in home gyms or commercial gym areas where heavy exercise equipment is being used and the customer is in need of the lowest cost rubber flooring solution available. These rolls are also guaranteed with our industry leading 5 year warranty.
Material – Reground rubber that is made from the post industrial recycled rubber created during the production of our standard rubber products. This allows us to make a low cost product that is designed to be functional. If you would like a rubber roll that has guaranteed color consistency, we would recommend one of our standard rolled rubber flooring products instead.
Width – 4 feet.
Thickness – Available in 1/4", 8mm and 3/8" thickness.
Length – Available in standard 25 and 50 foot roll lengths.
Color – Available in confetti color pattern and a primarily black color pattern. (Note: This flooring is made entirely from the post industrial recycled rubber that is naturally made during the production of our standard rubber flooring products. Due to this, color density, shade, and variation can exist in the flooring depending on what kind of colors and products we are running on any given day. Black regrind rolls may also contain a few color flecks and thus consistency of color can not be guaranteed with any regrind roll.)
Weight – 1.5 Lbs. per square foot for the 1/4” thick rolls, 1.8 Lbs. per square foot for the 8mm thick rolls and 2.2 Lbs. per square foot for the 3/8” thick regrind rubber flooring.
Origin – Made in the USA
Recommended Uses – Regrind rubber rolls have been used successfully in home gyms, commercial gyms, personal training studios, basements, indoor paintball studios, and in a variety of other locations where a durable non slip flooring solution would be beneficial. Even though this rubber flooring is cheap in price, it is still just as durable and can be used in places just as demanding as our regular rolled rubber flooring products. Regrind rolls are not normally recommended for use as dog kennel flooring or horse stall matting.
  • Our Regrind rolls ship in 1-3 business days when in stock. When out of stock, these rolls may take up to 5-10 days to ship out.
  • An email will automatically be sent to you with your tracking information as soon as your recycled rubber flooring ships and tracking information becomes available.
Regrind Rolls are very durable as well as easy to maintain and keep clean. Maintenance for regrind rolls include:
  • Vacuum any loose crumbs, dust or debris from the flooring surface when necessary.
  • Occasionally, you will want to use a damp mop with a mild soap and water solution. Recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.

For more detailed cleaning instructions and commercial cleaning instructions, Click Here.

When installing rolled rubber flooring, it is recommended that you use some kind of adhesive to prevent the rolls from moving around or sliding apart between adjacent rolls. The most common methods of adhering rubber rolls to the sub floor are:

A: Double Sided Tape Installation
  • First you will want to clean your sub floor so that it is free of all dust, dirt, and debris.
  • Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
  • Note: Rolls may be directional so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure color matches.
  • Make any necessary cuts to the rolls to fit them into the room using a Straight Edge and a Utility Knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
  • Apply double sided tape to perimeter of each roll.
  • Place rubber rolls back into position on top of the double sided tape.

  • B: Glue Installation
    • First clean your sub floor so that it is free of all dirt, dust and debris. Also, when gluing your flooring down, it is recommended that the sub floor is free of any moisture.
    • Loose lay your rolls in the room as you would like them to look after a complete installation. Let the rolls relax for up to 24-48 hours to ensure proper installation of your new flooring.
    • Note: Rolls may be directional so make sure the color matches on each roll. If the roll colors do not match, flip them or turn them 180 degrees to ensure color matches.
    • Make any necessary cuts to the rolls to fit them into the room using a Straight Edge and a Utility Knife with a fresh blade. We recommend leaving a gap around the rolls roughly the thickness of the rolls being used to account for expansion and contraction.
    • Roll up the rolls at one end of the room. Put down a 10 foot long light layer of polyurethane adhesive and unroll 10 of the flooring into the adhesive at a time.
    • Repeat this step for every 10 feet of roll length until the entire roll has been unrolled into it desired position.
    • After all rolls have been glued down, it is often recommended to use a 100 pound roller on the floor in order to guarantee good adherence to the sub floor. If a roller is not available, walking on the flooring in small choppy steps may also work.

    • For printable installation instructions, please Click Here.

Highlights


  • Reground Rubber - Color and density may vary between rolls.
  • Lowest cost rolled rubber available.
  • Black regrind rolls are slightly less dense than confetti colored rolls.
  • Confetti ships from the Midwest and west coast.
  • Black regrind rolls ship from the Midwest only.

Videos

Customer Questions & Answers


Don't see what you're looking for? 
Hello, can the rubber flooring be installed outside in a backyard?
Our Regind Rolls can be used outside in a backyard. In direct sunlight, these rolls will fade.
Hi, i am looking for a roll out rubber floor for our work out room in the garage. We have several heavy pieces of weight equipment and an elliptical. What would you recommend? Thank you
Our Regrind Rubber Rolls work great in garage gyms. These rolls are made from scrap material from our standard rolls, so they feature the same great qualities at a discount price. These rolls can handle heavy equipment on them and also the dropping of weights.
Is the regrind 3/8 thick rubber floor good for shock absorption during HIIT, Plyo, and Tabata training?
Our Regrind Rolls are perfect for high impact workouts. The best color for these types of workouts is our Black Regrind. It is made less dense than our standard rolls to give you more shock absorption.
Would this type of flooring be good for an indoor home basketball court?
Our Confetti Regrind Rolls have and are great as an indoor basketball court. These rolls are very easy to clean and maintain and are slip resistant when dry or wet.
So is the Black Regrind better than the confetti for P90x, jump roping, and impact activities? Or is it the same product with the color being the only difference? Thank you
Our Black Regrind is less dense than our Confetti Regrind making it better suited for high impact workouts such as P90X, jump training and the like.

results 1-5 of 14

Customer Reviews

results 1-4 of 116

We'd love your feedback! Write a Review
Average Rating
4.7/5.0

  Unbelievable floors. Love them!
Self-installed in Fitness Studio
from Brooklyn, NY wrote...
I have been in the industry a long time and have trained on many, many floors - so I am a snob about what is under my feet. I also just opened my own small group training center and needed rubber flooring that was durable, easy for me to install on both a budget and a deadline, that was of high quality to train on. I wanted to stay local and tried East Coast suppliers and manufacturers, but none had exactly what I wanted and then I discovered Rubber Flooring Inc. and I was in!!! Not only was the selection outstanding in terms of color, depth, style and usage - but they have so many ways to apply/install it. I specifically got the regrind rolls in confetti and people stop in their tracks when they come through the door. That's how nice these rubber floors are!! My clients love to train on it, they clean like a dream and really keep their color and luster. I am a burpee maniac and doing it on these mats is heaven. In addition, the customer care is some of the best I have ever received. If you run, manage or own in the fitness industry, you know how important that is, and Rubber Flooring's team is the best. Really held my hand through the whole process. Steered me back in the right direction when I veered a bit and then after installation (which was easy peasy - from delivery to literally rolling out the rubber and making a straight cut), still followed up with me for care and feedback. Loved it! Who does that? Thank you Rubber Flooring we are your biggest fans!!! HIIT BOX - Brooklyn NY
  Great Flooring
Self-installed in
from Woodstock, VT wrote...
We have a 1400 square foot commercial gym, it had low pile carpet in it, we put the 3/8 regrind rolls over the carpet and used carpet tape to keep it in place. It is wonderful. All of our gym members love it! It looks like a whole new gym.
  Tough to install
Installed in Outpatient Physical Therapy clinic
from Austin, TX wrote...
Rubber rolls are heavy, and material is thick. I needed a professional installer, who worked very hard to cut through the material. Rolls were not matching in color of black, and three rolls were damaged on the sides upon delivery so that the seams have divots and chunks interrupting the seam in some places. I do like the flecks of color in the regrind rolls and samples sent before hand were a good example of what was delivered.
  great product
Self-installed in CrossFit gym
from Chatham,IL wrote...
Very happy with the product! Love the rolls, not happy with the delay in shipping, however the customer service department fixed everything! Thanks!

RubberFlooringInc- Customer
results 1-4 of 116
Your item was successfully added to cart

Color:
Qty:

$0.00 $0.00