Description – Indulge in the ultimate garage upgrade with Nitro Tiles Pro, the sophisticated and thicker counterpart to Nitro Tiles. Unparalleled in both elegance and durability, Nitro Tiles Pro outshines the competition, promising exceptional longevity even in demanding conditions. Effortless installations and minimal maintenance redefine your garage transformation experience. These tiles resist spills and stains, guarding against oil, gas, and household chemicals. Crafted from impact-resistant polypropylene, they effortlessly support heavy rolling vehicles without compromising strength. Nitro Tiles Pro is more than just flooring; it's a lavish statement of durability, resilience, and sophistication. Invest in a lifetime of opulence and style. Order Nitro Tiles Pro now for a luxurious garage transformation that sets a new standard.
Specs
| Material |
Polypropylene |
| Size |
12" x 12" |
| Thickness |
5/8" (15mm) |
| Weight (Approx.) |
0.62 lbs per tile |
| Colorfast |
Yes |
| Chemical Resistant |
Yes |
| Slip Resistant |
Yes |
| Car Jack Approved |
No |
| Surface Finish |
Gloss |
| Interlock Style |
Hidden/Snap Together |
| Rolling Weight |
Not tested |
| Warranty |
Limited Lifetime |
In Stock - Ships between Apr 19 - 22
Nitro Tiles are easy to clean and can be cleaned as often as needed.
- Sweeping or vacuuming any loose crumbs, dust, or debris from the tiles.
- Occasionally damp mop the garage tiles with a mild soap and water mixture. Some soaps commonly used include Dawn dish detergent and/or Tide laundry detergent.
Note:
- These tiles can be damaged under the weight of a car jack. We recommend using your car jack directly on concrete or place a plywood board or steel plate under the jack.
- Garage tiles are produced in batches, which can lead to color variations in your order and affect color variation between samples and your order. All colors may present some color variation, and graphite and gunmetal can produce the most. These colors can vary greatly between batches, and we recommend that you order more flooring than needed for mistakes and replacements. This will give you the greatest chance to keep continuity across your floor.
- This is not a stain-proof product. Street tar can stain light-colored tiles and usually can be remedied with a cleaner called Purple Power. If you have performance tires, staining can occur with light-colored tiles. To get rid of tire marks, you might have to replace the affected tiles, or use darker tiles to disguise the stains. If the staining on your floor does not dissipate, please contact our dedicated Customer Service team at 800-613-0996 who can further assist you.
Installing these interlocking tiles is very simple and usually done by the consumer. Typical installation of these tiles is as follows:
- Clean your subfloor so that it is free of all dirt, dust, grease, or other foreign material.
- When installing the hard plastic tiles, we recommend starting in the front left corner of the room and working your way out from there.
- Make sure the female side (loops) of the tile is facing away from the wall.
- After lining the left wall and the adjacent wall with tiles, proceed to fill the rest of the room with whole tiles.
- When you come up to a wall or obstruction, measure the area and cut the tiles with a tile cutter or a power saw with a fine-toothed blade. Then put the trimmed tiles into place.
- When making cuts, ensure you leave a 3/4” space between the tiles and the wall or obstruction.
- Once the tiles are in place, you can then snap in the edge pieces if you purchased them.
